BuildMetricLab

Landscaping & Outdoor

Sod Calculator

Calculates sod rolls needed by lawn area, including a wastage allowance and estimated cost

Updated May 13, 2026 · Live

What this tool does

Calculates sod rolls needed by lawn area, including a wastage allowance and estimated cost.

Estimates the number of sod rolls and pallets needed to cover your lawn area, including a wastage buffer.

Inputs
ft²
ft²
%
$
Result

Sod Rolls Required

34

Lawn Area
320.0 ft² (29.7 m²)
With 5.0% Wastage
336.0 ft² (31.2 m²)
One Roll Covers
10.0 ft² (0.9 m²)
Rolls Needed (exact)
33.60
Spare After Rounding
4.0 ft² (0.4 m²)
Pallets (about 450 ft² each)
0.75
Estimated Cost
$204.00
Laying
Lay within 24 hours of delivery, staggered like brickwork, and water straight away

Diagram

320 ft²
Price it on PlainEstimate

Opens these materials as a new estimate on PlainEstimate, our free estimate and invoice app.

Plain Estimate
From BrightScale Labs
Invoice maker
Quote at the door. Signed on the spot.
Estimates and invoices for trades, built while you are still in the room.
Scan to get
Get it onGoogle Play

People also use

Formula Used
N=⌈A⋅(1+w)r⌉N = \left\lceil \frac{A \cdot (1 + w)}{r} \right\rceil
NN
Turf rolls required
AA
Lawn area
ww
Wastage allowance (decimal)
rr
Roll coverage

How the sod calculator works

The formula is rolls = ceil(lawn area × (1 + wastage ÷ 100) ÷ area one roll covers). With the defaults, a 320 ft² lawn (29.7 m²) and 5% wastage becomes 336 ft² (31.2 m²). A roll of 2 ft × 5 ft covers 10 ft² (0.93 m²), so 336 ÷ 10 = 33.6, which rounds up to 34 rolls. At $6 a roll that is $204.00, with 4 ft² spare. The tool also shows pallets, using about 450 ft² (41.8 m²) a pallet, so 336 ÷ 450 = 0.75 of a pallet. Pallets commonly hold 400–500 ft² depending on the grass and supplier, so confirm with yours.

Measure the lawn in plan. A rectangle is length × width. A circular bed is π × radius², so a 10 ft radius is 314 ft² (29.2 m²). Split an irregular lawn into rectangles, triangles and circles and add them, then subtract any beds or paving that stay.

Typical US landscaping and outdoor wastage

The default 5% suits a lawn with straight edges. Curved edges, many corners and narrow strips need more, because each piece is cut from a full roll and the offcut is often too small to use. A figure of 10% is a common allowance for an irregular lawn: a 2,000 ft² (185.8 m²) lawn at 10% is 2,200 ft², which is exactly 220 rolls or about 4.9 pallets. Sod is perishable, so ordering a little over costs less than a second delivery. Do not stretch sod to fill a gap; Penn State Extension advises moving the piece with a rake so it abuts the next one, and filling any gap with a trimmed scrap.

What this tool does not do

It does not price soil preparation, topsoil, fertiliser, an irrigation system, staking or delivery. It does not choose the grass: cool-season and warm-season grasses differ in when they should be laid and how much water they need. It does not check that your soil, sun and water suit the grass, and it adds nothing for labor or removing an old lawn. Use the topsoil calculator to price the soil underneath.

On-site considerations for sod

Sod deteriorates quickly. Penn State Extension advises using it immediately, because it can deteriorate within 24 to 48 hours in warm weather. If you cannot lay it at once, unroll it, put it grass-side up in a shaded place and keep it watered. The soil should be firm and smooth, dry to slightly moist, and never wet when you lay. Lay the strips staggered like bricks, tight together, with the first row against a straight edge or a string line. On slopes, stake each strip and remove the stakes once it has rooted. Water straight away after laying.

Timing depends on the grass and the climate. Penn State describes the optimum times for cool-season turfgrass as spring and from late summer to fall, and says sod can be laid at almost any time except when the ground is frozen. Warm-season grasses are generally laid in late spring and summer when they are growing actively; check with a local supplier.

Codes and compliance

Lawns rarely need a permit, but a few local rules touch them. Many municipalities limit watering during dry periods, which matters for a new lawn that needs regular water in its first weeks, so check the rules and the supplier's advice before you order. Sloping sites may need erosion control until the sod has rooted, and some areas require a stormwater or grading plan for larger earthworks. Contact your local building or public-works department if you are changing levels. Outside the US, use your own local rules.

Before you order

Ask the supplier for the roll or slab size, the grass type and the number of rolls on a pallet. Schedule delivery for the day you will lay it, and have the soil prepared and the helpers ready, because the sod is perishable. Agree where the pallets will be set down, as they are heavy. A grower association such as Turfgrass Producers International can help you find a producer. Compare two written quotes on the same basis, including delivery.

Adjusting the defaults

Every input can be changed. If your supplier quotes per square foot rather than per roll, multiply the price by the roll area to get the price per roll (for example $0.60 a ft² on a 10 ft² roll is $6). Price per roll is optional: leave it blank and the cost line disappears. The default price of $6 is a placeholder, not a market figure.

Using this sod calculator alongside other BuildMetricLab tools

Prepare the bed with the topsoil calculator, and compare sod with the grass seed calculator if you are weighing cost against speed. Everything runs in your browser, nothing is sent anywhere, and the formula is shown so you can check the math. Conversions follow NIST SP 811.

Sources & methodology

Rolls = ceil(lawn area × (1 + wastage ÷ 100) ÷ area one roll covers). Area and roll size are entered in the unit shown and converted exactly (1 ft² = 0.09290304 m²). Pallets = area with wastage ÷ 450 ft² (about 41.8 m²), a planning figure; pallets commonly hold 400–500 ft². A small tolerance stops an exact fit gaining an extra roll. Area and roll size must be above zero, wastage zero or more; a blank price hides the cost. The tool does not include soil preparation, fertiliser, irrigation or delivery.

Frequently asked questions

Are sod calculator results accurate enough to order materials?

They are accurate to the numbers you enter. The count is the lawn area plus wastage, divided by the roll area and rounded up, so it depends on the measured area and the roll size on the label. Confirm the quantity and the pallet size with your supplier, and order for the day you will lay it.

What wastage percentage should I use?

The default is 5%, which suits a lawn with straight edges. Use about 10% or more for curved edges, narrow strips and irregular shapes, because the offcuts are often too small to use. Sod is perishable, so a little extra is cheaper than a second delivery.

Is this a substitute for professional advice?

No. It is a planning estimator. Grass choice, soil preparation and watering depend on your climate and site, and local rules can restrict watering or earthworks. Ask a local supplier or a landscape professional before you start.

Can I change the unit prices?

Yes. The price per roll is editable, and you can leave it blank to hide the cost line. If your supplier quotes per square foot, multiply by the roll area to get the price per roll.

Spotted something off?

Calculations or display — let us know.

Calculators from other categories that planners often reach for next.