BuildMetricLab

Painting & Decorating

Exterior Paint Calculator

Estimates exterior paint from area, coats and the can's coverage rate, rounded up to whole cans

Updated October 14, 2026 · Live

What this tool does

Estimates exterior paint in gallons or litres from wall, siding or fence area, coat count and the coverage rate on the can, rounded up to whole cans with a cost.

Exterior Paint Calculator: litres or gallons from wall, siding or fence area × coats ÷ coverage, rounded up to whole tins, with the volume bought and a cost.

Inputs
ft²
ft²/gal
gal
$
Result

Paint Required

2.29 gal

Area
400.0 ft²
Coats
2
Coverage Used
350 ft²/gal (8.6 m²/L)
1.00 gal Cans
3
Bought (with the part can)
3.00 gal (11.4 L)
Estimated Cost
$114.00
Price it on PlainEstimate

Opens these materials as a new estimate on PlainEstimate, our free estimate and invoice app.

Plain Estimate
From BrightScale Labs
Invoice maker
Quote at the door. Signed on the spot.
Estimates and invoices for trades, built while you are still in the room.
Scan to get
Get it onGoogle Play

People also use

Formula Used
L=A⋅crL = \frac{A \cdot c}{r}
LL
Paint volume required (litres or gallons)
AA
Wall area
cc
Number of coats
rr
Coverage rate from the data sheet (m²/L or ft²/gal)

How the exterior paint calculator works

Paint needed = wall area × number of coats ÷ coverage rate. That is the whole calculation, and it is the same one printed on the back of the tin, just run in the other direction. The calculator then divides the volume by your can or tin size and rounds up to whole containers, because nobody sells 2.29 gallons. With the US defaults, 400 ft² of siding at two coats and 350 ft² per gallon needs 2.29 gallons, which is three one-gallon cans and $114 at $38 a can. On the metric side, 40 m² at two coats and 12 m² per litre needs 6.67 litres, three 2.5 litre tins, and the rows under the result show the 7.5 litres you actually carry home and the coverage figure in both unit systems.

Coverage is the number that decides everything, and it is also the one people guess. The default 350 ft²/gal is 8.6 m²/L, inside the 250 to 350 ft²/gal range Benjamin Moore quotes for Aura Exterior satin. The metric default of 12 m²/L (489 ft²/gal) suits smooth render, planed cladding or previously painted masonry; Dulux Trade Weathershield Smooth Masonry is rated at up to 16 m²/L on smooth rendering but only 4 to 6 m²/L (163 to 244 ft²/gal) on pebbledash. The same tin can therefore paint a quarter of the area on a rough wall. Read the rate for your surface off the data sheet, and if the sheet gives a range, use the low end for a first coat on bare material.

Typical exterior paint coverage and wastage

There is no wastage field, on purpose. A data sheet coverage figure is already a practical rate, and the rounding up to whole tins builds in a margin of its own: the default job buys 3 gallons for 2.29 gallons of need, a quarter more than the maths asks for. Adding 10% for brush loading, cutting in around windows and touching up after the scaffold comes down turns 2.29 gallons into 2.51 and 6.67 litres into 7.33, and in both cases the container count does not move. Where a 10% allowance does matter is on an exact hit, such as 30 m² at two coats and 12 m²/L, which is 5.00 litres and one 5 litre tin with nothing spare. Adding the margin to the area before you type it, or rounding the coverage down, is the safe way to handle that case.

Measuring the area is where real jobs go wrong. Walk the perimeter, multiply by the height to the eaves, add half of base times height for each gable, then take off the big openings. A 10 × 8 m house with 5 m to the eaves has 36 m of perimeter and 180 m² of wall, two gables of 2.5 m rise add 20 m², and 25 m² of windows and doors come off, leaving 175 m² (1,884 ft²). Small windows are usually left in the total; the extra paint covers the cutting in.

What this tool does not do

It does not price labour, scaffolding, access equipment or preparation, which on an exterior job often cost more than the paint. It does not choose the product: a stabilising primer on chalky masonry, a fungicidal wash where there is algae, or a bare-timber primer are separate purchases with their own coverage rates, and the primer calculator handles those. It does not know whether a colour change needs a third coat, and it cannot tell that a textured surface is textured. Put the data sheet rate for your actual surface in the coverage field and it will do the rest.

On-site considerations for exterior paint

Water-based exterior paints have temperature and humidity limits that the calculator cannot see. Dulux Trade asks you to avoid applying Weathershield below 7°C (45°F), in rain or fog, or above 80% relative humidity; Dulux Australia's exterior range wants conditions above 5°C (41°F); Benjamin Moore rates Aura Exterior for application down to 2°C (35°F). Recoat times run from about two hours in warm, dry weather to four or more when it is cool, so a two-coat job on one elevation is usually a two-day job once the morning dew has gone. Fence panels drink paint: Ronseal's one-coat fence treatment covers up to 6 m²/L (244 ft²/gal) on rough sawn timber, and ten 1.8 × 1.8 m panels painted both sides are 64.8 m² (698 ft²), which at one coat is 10.8 litres and three 5 litre tins.

Codes and compliance

Rules are regional, so check the ones that apply where you are. In the United States, the Environmental Protection Agency's Renovation, Repair and Painting rule requires any firm paid to disturb painted surfaces in homes built before 1978 to be lead-safe certified, and that includes sanding old exterior paint before a repaint. Older buildings in other countries may also carry lead paint under later coats, and a test kit is cheap. VOC limits for exterior coatings differ between the US, Canada, the EU and Australia, and a product sold in one market may not be the same formulation in another, so the coverage figure on the local data sheet is the one to use. Solvent-based products need ventilation and the protective equipment named on the safety data sheet wherever you are.

Before you order

Colour drift between batches is visible on a large elevation, so a single batch for the whole job, or boxing the tins together before you start, avoids a stripe where one tin ended. If you run short mid-wall, finishing to a corner or a downpipe hides the join. Compare the calculator's can count with the supplier's quote and confirm the product, finish and batch number on the paperwork match what is on the shelf; a 10 litre tin is often cheaper per litre than four 2.5 litre tins, and the tin size field lets you test that before you commit.

Adjusting the defaults

Every field is editable and the result updates as you type. Area accepts any positive figure, coats run from one to five, and the coverage, tin size and price fields take whatever your data sheet and quote say. Switching between US units and metric converts the inputs for you: 350 ft²/gal becomes 8.6 m²/L and a one-gallon can becomes 3.79 litres, so a figure copied from a North American data sheet can be used on a metric job without a calculator in the middle. Large jobs are the place to try a bigger container; 120 m² (1,292 ft²) of smooth render at two coats and 8 m²/L (326 ft²/gal) is 30 litres, exactly three 10 litre tins, while the same wall in pebbledash at 5 m²/L (204 ft²/gal) is 48 litres and five tins.

Using this exterior paint calculator alongside other BuildMetricLab tools

The primer calculator sizes the sealer or primer coat that bare or chalky surfaces need first, with its own coverage rate. The deck stain calculator covers horizontal timber, which absorbs far more than a wall. The paint weight calculator turns the volume into kilograms or pounds for carrying it up a ladder or shipping it. Every BuildMetricLab tool runs in your browser, with no sign-up and no data sent anywhere, and the formula is shown on the page so the maths can be checked.

Sources & methodology

Paint volume = wall area × coats ÷ coverage rate, with the coverage entered as the data sheet prints it (m²/L, or ft²/gal converted at 0.09290304 m² per ft² and 3.785411784 L per US gallon). Containers = volume ÷ tin size, rounded up to a whole tin; cost = tins × price per tin. No separate wastage is added: the data sheet rate is a practical figure and the rounded-up container count is shown with the volume actually bought. Default coverage of 350 ft²/gal (8.6 m²/L) sits inside Benjamin Moore's 250 to 350 ft²/gal range for Aura Exterior; the metric default of 12 m²/L is a smooth-surface rate within Dulux Trade Weathershield's quoted range. Inputs are validated: area and coverage above zero, at least one coat, tin size above zero, price not negative.

Frequently asked questions

Are exterior paint calculator results accurate enough to order materials?

They are accurate to the coverage figure you give them, and that is the weak link. The formula is exact and the rounding to whole tins adds a margin, but a data sheet rate of 12 m²/L on smooth render can fall to 5 m²/L on pebbledash, so a wrong surface assumption doubles the shortfall. Measure the walls, use the data sheet rate for the actual surface, and confirm the tin count with the supplier before the paint is tinted, because tinted paint rarely goes back.

How should I account for wastage or extra coats?

The calculator has no wastage field. The coverage figure on a data sheet is already a practical rate, and rounding up to whole tins usually leaves a margin: the default job buys 3 gallons for 2.29 gallons of need. If you want an explicit 10% for cutting in and touch-ups, add it to the area before you type it, or round the coverage rate down. Watch for exact hits such as 30 m² at two coats and 12 m²/L, which is precisely one 5 litre tin with nothing left over.

Is this a substitute for professional advice?

No. It is a quantity estimate for buying paint. It does not assess whether the substrate is sound, whether old coatings contain lead, which primer a chalky or new surface needs, or how to work safely at height. Those questions belong with a qualified decorator or contractor, and in the United States any paid work that disturbs paint in a home built before 1978 must be done by a lead-safe certified firm under the EPA's Renovation, Repair and Painting rule.

Can I change the unit prices?

Yes. The price field is the cost of one can or tin in the page currency, and the estimated cost is that price multiplied by the rounded-up container count, so it already reflects the part tin that gets bought. Change the tin size to see whether a larger container works out cheaper for your area: a 10 litre tin is often less per litre than four 2.5 litre tins.

Spotted something off?

Calculations or display — let us know.

Calculators from other categories that planners often reach for next.