BuildMetricLab

Driveway & Hard Paving

Driveway Sealcoat Calculator

Calculates litres and pails of asphalt driveway sealer from area, coverage and coats

Updated June 26, 2026 · Live

What this tool does

Calculates the litres and pails of asphalt driveway sealer needed from the driveway area, the coverage per coat and the number of coats.

Driveway Sealcoat Calculator: estimates the litres and pails of sealer an asphalt driveway needs from its area, the coverage per coat and the number of coats.

Inputs
ft²
ft²/gal
gal
$
Result

Driveway Sealer Required

15.4 gal

Area
540.0 ft²
Coats
2
5.0 gal Pails
4
Estimated Cost
$140.00
Conditions
Asphalt only; apply above 50°F with 24 hrs dry weather
Price it on PlainEstimate

Opens these materials as a new estimate on PlainEstimate, our free estimate and invoice app.

Plain Estimate
From BrightScale Labs
Invoice maker
Quote at the door. Signed on the spot.
Estimates and invoices for trades, built while you are still in the room.
Scan to get
Get it onGoogle Play

People also use

Formula Used
P=⌈A⋅cy⋅v⌉P = \left\lceil \frac{A \cdot c}{y \cdot v} \right\rceil
PP
Pails of sealer required
AA
Driveway area (m²)
cc
Number of coats
yy
Coverage per litre (m²/L)
vv
Pail size (L)

How the driveway sealcoat calculator works

The calculator multiplies the driveway area by the number of coats, divides by the coverage per coat to get litres of sealer, then divides by the pail size and rounds up to whole pails. In symbols, litres = A × c ÷ y and pails = ⌈litres ÷ v⌉, where A is the area, c the number of coats, y the coverage in m² per litre and v the pail size in litres. The cost is the number of pails times the price per pail, and it is left out if you clear the price box.

Worked example with the defaults: a 50 m² driveway (538 ft²) with 2 coats at 2 m²/L needs 50 × 2 ÷ 2 = 50 L. A pail holds 18.9 L, and 50 ÷ 18.9 = 2.65, so you buy 3 pails. At $45 a pail that is $135. In US units, a 600 ft² driveway (55.7 m²) with 2 coats at 80 ft² per gallon needs 600 × 2 ÷ 80 = 15 gal, which is three 5-gallon pails. Because partial pails cannot be bought, the pails figure always rounds up, so you finish with leftover sealer.

Sealing an asphalt driveway

Sealcoat is a thin protective layer that slows damage from sunlight and water and restores a dark finish. It does not repair structure. Sweep and wash the surface, treat oil spots, and fill cracks with a crack filler first, because sealer is a coating and not a filler. Apply thin, even coats; two thin coats generally wear better than one thick one, though some products say to apply only one, so follow the label. Sealer is for asphalt only. Concrete uses a different sealer.

Coverage is the number that moves the result most. Manufacturer labels for asphalt driveway sealer commonly quote about 200 to 500 ft² per 5-gallon pail, depending on how rough and porous the surface is. That is roughly 1.0 to 2.5 m²/L, or 40 to 100 ft² per gallon. A smooth, recently sealed surface sits at the high end and an old, rough one at the low end. The default of 2 m²/L (about 80 ft² per gallon) is a mid-range planning value. Some labels state coverage per pail for the whole job and others per coat, so read yours and divide accordingly.

To convert coverage, 1 ft² per gallon is 0.0245 m² per litre, so 80 ft²/gal is 1.96 m²/L and 2 m²/L is 81.5 ft²/gal. Metric and US figures describe the same sealer, only the units change.

Timing and conditions

Most products ask for a dry pavement, air and surface temperatures above about 10°C (50°F), and dry weather for at least a day afterwards. Check the label for the exact minimum, because it differs by product. Avoid working in direct midday sun, and avoid sealing late in the season once overnight temperatures drop. New asphalt needs time to cure before its first seal, often a number of months, so ask the paving contractor how long to wait.

What this tool does not do

It estimates sealer quantity only. It does not judge whether the driveway needs crack filling, patching or resurfacing first, and it is not a substitute for a paving contractor's inspection of a failing surface. It does not add sand, additives, crack filler, primer or brushes. It also cannot know your product, so the coverage must come from the label or supplier.

Adjusting the defaults

Every input can be edited. Enter your own area, coverage, coats, pail size and price and the litres, pails and cost update at once. Coats must be a whole number of 1 or more. Area, coverage and pail size must be above zero, and a blank box returns a message instead of a result. Pail sizes differ by region: a US 5-gallon pail is 18.9 L, but an imperial 5-gallon pail is 22.7 L, so enter the real volume printed on yours. The price field is in your own currency, and the tool does not convert money.

On-site considerations

Work in thin, even coats with a brush at the edges and a squeegee or sprayer for the body. Keep traffic off for the cure time on the label, which is commonly a day or two. Check the sealer type before you buy. Coal-tar-based sealcoat has been linked by the US Geological Survey to high levels of polycyclic aromatic hydrocarbons (PAHs), some of which are suspected human carcinogens and toxic to aquatic life, and some US cities and states restrict it. Asphalt-based products contain far less. Rules depend on where you live, so check with your local authority and wear the protective equipment named on the label.

Using this alongside other BuildMetricLab tools

Pair this with the asphalt, concrete driveway and block paving calculators to plan a whole driveway, and with the material cost calculator to price supplies. Every BuildMetricLab tool runs in your browser with no sign-up, and every formula is shown on the page so you can check the arithmetic yourself.

Sources & methodology

Sealer volume is the driveway area times the number of coats divided by the coverage per coat in m² per litre. Pails are that volume divided by the pail size, rounded up to a whole pail, and cost is pails times the price per pail. The default coverage of 2 m²/L (about 80 ft²/gal) sits inside the 200 to 500 ft² per 5-gallon pail range that manufacturers commonly print on labels, which is a planning value and not a standard. Conversions use 1 ft² = 0.092903 m² and 1 US gallon = 3.78541 L. Blank, zero or negative area, coverage or pail size, a coats value that is not a whole number of 1 or more, and a negative price return a message instead of a result.

Frequently asked questions

Are driveway sealcoat calculator results accurate enough to order sealer?

They are a good starting point, but coverage varies widely with the product and how rough or porous the surface is. Manufacturer labels commonly range from about 200 to 500 ft² per 5-gallon pail (1.0 to 2.5 m²/L), so enter the figure from your label and add a pail if the result is close to a whole number.

What wastage percentage should I use?

There is no wastage field. The tool rounds up to whole pails, which already leaves spare sealer. Lower the coverage figure if the surface is rough, old or porous, because that raises the litres needed. A 10% lower coverage adds about 11% more sealer.

Does this replace professional advice?

No. This tool is a planning estimator. It does not check whether the asphalt is sound enough to seal. For a failing surface or drainage problems, ask a paving contractor, and check local rules on sealer type, since some regions restrict coal-tar products.

Can I change the unit prices?

Yes. Every field is editable, including the price per pail and the pail size. Enter your supplier's quote to get a total that matches your project, or clear the price to hide the cost row.

Spotted something off?

Calculations or display — let us know.

Calculators from other categories that planners often reach for next.