Painting & Decorating
Wallpaper Paste Calculator
Packs of wallpaper paste from the rolls you are hanging and the rolls one pack hangs, with spare and cost
Updated October 9, 2026 · Live
What this tool does
Works out how many packs of wallpaper paste to buy from the number of rolls and the rolls one sachet or tub hangs as printed on the pack, rounding up to whole packs and showing the spare. The US side takes the container coverage and the roll area instead. Shows wall area in both unit systems and the cost at your price.
Rolls to hang divided by the rolls one pack hangs, rounded up to whole packs.
People also use
Formula Used
Formula Used
How the wallpaper paste calculator works
Wallpaper paste is sold by the roll. A powder sachet says how many rolls it hangs, a ready-mixed tub says rolls too or, in North America, the area it covers, and either way the estimate is the number of rolls you are hanging divided by the number one pack will do, rounded up to whole packs. Solvite's 185 g all-purpose sachet "hangs up to an average of 10 wallpaper rolls". Henkel's Metylan Normal data sheet is more careful and gives a 125 g packet as 10 rolls (50 m²) of light paper, 8 rolls (40 m²) of normal paper and 6 rolls (30 m²) of heavy paper, each at a different amount of mixing water. Palace Chemicals' all-purpose flake data sheet puts one sachet at 4 to 5 rolls of normal paper or woodchip, 4 rolls of vinyl, 2 to 2½ rolls of embossed paper and 1¾ to 2 of heavy embossed. In North America paste is mostly ready-mixed and sold by the gallon with an area on the label: Roman's PRO-880 technical data gives "up to approx. 330 square feet per gallon", so the US side of the calculator takes the container coverage and the area of one roll, and works out rolls per container from them.
The roll is the unit that makes the two sides comparable. A European roll is 10.05 m by 0.53 m, which is 5.33 m² or 57 ft², and AS Creation's roll calculator uses that format as the standard; an American double roll is 56 to 70 ft² (5.2 to 6.5 m²) and a single roll 28 to 35 ft², as Selected Wallpapers' size guide sets out, so a double roll and a European roll are close to the same thing. The metric default is 6 rolls from a pack that hangs 10: 0.6 of a pack, so one pack with 4 rolls' worth spare, 32.0 m² (344 ft²) of wall. The US default is 6 double rolls of 56 ft² from a gallon covering 330 ft²: the gallon hangs 5.9 rolls, 6 rolls is 1.02 gallons, and the second gallon is bought for a tenth of a roll's worth of paste. That is the rounding rule working as it should, and the Packs Needed (exact) row shows how close the call was so you can decide whether a quart would do instead.
Why the rolls-per-pack figure moves
The same sachet hangs different numbers of rolls because heavier papers take more paste and a thicker mix. On the Metylan sheet the 125 g packet is mixed at 1 part to 70 of water for light paper and 1 to 50 for heavy paper, which is why the roll count falls from 10 to 6; on the Palace sheet the water per sachet drops from 3.5 litres for normal paper to 2.5 litres for Anaglypta and the coverage falls from 4 to 5 rolls to 2 to 2½. Read the table on the back of your pack for the paper you are hanging and enter that figure, not the headline on the front. Paste-the-wall and ready-mixed products quote rolls or area too: Solvite's 4.5 kg ready-mixed tub is sold as a 5-roll tub, and Roman's 330 ft² per gallon on a 56 ft² double roll is 5.9 rolls, so a gallon of ready-mixed and a 5-roll sachet are doing roughly the same job, one mixed for you and one not.
The calculator does not add a wastage percentage, because the pack figures are already "up to" or "approximately" and rounding up to whole packs leaves spare in all but the exact cases. If you will size the wall first, or hang a heavily embossed paper the pack table does not cover, lower the rolls per pack; if lining paper is going up as well, add its rolls to the count.
Worked examples
A hallway of 24 rolls from 10-roll packs: 2.4 packs, so 3, with 6 rolls' worth spare, which is mixed paste unless the third sachet is split by weight. Nine rolls of heavy paper at the Metylan 6-roll rate: 1.5 packets, so 2. One roll of vinyl at the Palace 4-roll rate: a quarter of a sachet, so one sachet; the part-used sachet keeps if it stays dry, but mixed paste does not, so mix a part of it. On the US side, 10 double rolls from 330 ft² gallons is 1.7 gallons, so 2; 5 wide double rolls of 70 ft² is 350 ft², 1.06 gallons, so 2 again, and the spare is 4.4 rolls' worth; a single roll of 28 ft² for a feature panel is 0.34 of a quart. For a contract of 500 double rolls from 5-gallon pails at 1,650 ft² each, 28,000 ft² (2,601 m²) of wall is 16.97 pails, so 17, with less than one roll's worth to spare: at that scale the rounding costs nothing and the pack table is what matters.
Mixing, temperature and the sachet you cannot halve
Powder paste is mixed into the amount of cold water the pack table gives for the paper weight, sprinkled in while stirring, left to stand and stirred again; Palace says 30 seconds of stirring, 3 minutes standing and a second stir, Metylan says the paste is ready in 20 minutes. Both the Palace sheet (not below 10°C) and the Roman sheet (room above 50°F) put a floor on the temperature. Ready-mixed paste can be thinned, Roman allows up to a pint of water per gallon, but it cannot be stiffened, so it is bought for the paper it is going on. A sachet can be split by weight if you have scales, but the pack table is written for a whole sachet in a stated volume of water, so half a sachet means half the water as well.
What the calculator leaves out
It does not count the wallpaper itself; that is the wallpaper calculator, which takes the wall sizes, the roll size and the pattern repeat. It does not know that the wall needs sizing first, which uses paste at a thinner mix and comes off the same sachet; that lining paper is going under the finish paper, which doubles the rolls; or that a paste-the-wall product is being pasted to the paper instead, which uses more. It counts packs of one product at one rate. If the room mixes paper weights, run it once for each.
Using this with other BuildMetricLab tools
Count the rolls with the wallpaper calculator, price the ceiling and woodwork with the painting cost calculator, and take the packs to PlainEstimate from the result card. All BuildMetricLab tools run in your browser with no sign-up, and the formula is on the page so the maths can be checked.
Sources & methodology
Packs = rolls to hang ÷ rolls one pack hangs, rounded up to a whole pack; spare = packs × rolls per pack − rolls; cost = packs × price. Wall area = rolls × roll area, shown for comparison only (European roll 10.05 m × 0.53 m = 5.33 m², 57 ft²). US side: rolls per pack = container coverage (ft², converted to m²) ÷ roll area (ft², converted to m²); the ratio is unit-free. Pack figures from the sheets: Solvite 185 g all-purpose sachet 10 rolls; Metylan Normal 125 g 10 rolls (50 m²) light, 8 (40 m²) normal, 6 (30 m²) heavy paper; Palace all-purpose sachet 4 to 5 rolls normal, 4 vinyl, 2 to 2½ embossed, 1¾ to 2 heavy embossed; Roman PRO-880 up to about 330 ft² per US gallon.
- Palace Chemicals, All Purpose Wallpaper Paste technical data sheet (October 2024): rolls per sachet and water per sachet by paper type, not below 10°C
- Henkel, Metylan Normal technical data sheet: 125 g packet mixes 1:70, 1:60 or 1:50 for 10, 8 or 6 rolls (50, 40 or 30 m²) of light, normal or heavy paper; roll size DIN EN 233 0.53 m × 10.05 m
- Roman Decorating Products, PRO-880 Ultra Clear Adhesive technical data (January 2018): coverage up to approx. 330 square feet per gallon, room above 50°F, dilute up to one pint per gallon
- Wickes, Solvite All Purpose Wallpaper Paste 10 Roll: 185 g sachet, hangs up to an average of 10 wallpaper rolls
- AS Creation, roll calculator: standard Euro roll format 10.05 m × 0.53 m
- Selected Wallpapers, European rolls versus double rolls: European roll about 57 sq ft, US single roll 28 to 35 sq ft, double roll 56 to 70 sq ft
Frequently asked questions
Are wallpaper paste calculator results accurate enough to order materials?
Yes, if the rolls-per-pack figure comes from the table on your pack for the paper you are hanging. The count rounds up to whole packs, and the Spare After Rounding row shows how much of the last pack is unused. For a heavy or embossed paper, use the lower figure the pack gives for it, not the headline roll count on the front.
How much paste does the calculator assume per roll?
It does not assume a weight of paste per roll. It divides the rolls you are hanging by the number of rolls one pack hangs, as printed on the sachet or tub, and rounds up. The metric default is 10 rolls per pack, the figure on a Solvite 185 g all-purpose sachet and on a Metylan 125 g packet for light paper; the same Metylan packet does 8 rolls of normal and 6 of heavy paper. On the US side, enter the coverage on the container (Roman PRO-880 gives up to about 330 ft² per gallon) and the area of one roll (a double roll is 56 to 70 ft²), and the calculator divides one by the other.
Does this replace professional advice?
No. It counts packs of paste. Whether the wall needs sizing, lining or a different adhesive for the covering is a question for the paper's hanging instructions and a decorator. For work that affects structure, gas, electrics, plumbing or drainage to a public sewer, use a suitably qualified professional.
Can I change the unit prices?
Yes. The price per pack is an input, so enter what your supplier charges for the sachet, tub or gallon you will buy, and the cost is that price times the whole packs needed. Leave it at zero to see quantities only.
Spotted something off?
Calculations or display — let us know.
Related tools
Calculators from other categories that planners often reach for next.













