Painting & Decorating
Deck Stain Calculator
Estimates deck stain or sealer gallons
Updated May 13, 2026 · Live
What this tool does
Estimates the deck stain or sealer you need from the deck area, the number of coats and the coverage on the product label, and rounds up to whole cans.
Estimates deck stain or sealer gallons, cans, and total cost from your deck area and coverage rate.
People also use
Formula Used
Formula Used
How the deck stain calculator works
The calculator works out how much stain or sealer a deck needs and how many cans to buy. It multiplies the deck area by the number of coats and divides by the coverage per coat from the product label. The result is rounded up to whole cans, because you cannot buy part of one. Every figure is an estimate.
The formula is V = A × n ÷ c, where A is the area, n the number of coats and c the coverage per coat. Worked example, US units: a deck of 160 ft² with 2 coats at 300 ft² per gallon needs 160 × 2 ÷ 300 = 1.07 gal. That rounds up to 2 one-gallon cans, or $76 at $38 a can. Worked example, metric: 15 m² with 2 coats at 8 m² per litre needs 15 × 2 ÷ 8 = 3.75 L, which is 2 cans of 2.5 L.
Typical stain coverage and allowances
Coverage is not a fixed number. It depends on the product, the wood and the condition of the surface. Smooth, new boards cover further than rough or weathered ones, and a thin penetrating stain covers further than a thick one. One US gallon is 3.785 L, so 300 ft² per gallon is about 7.4 m² per litre, and 8 m² per litre is about 326 ft² per gallon. Always use the figure on your own can, and use the low end of the range for rough wood.
The tool adds no wastage. If you expect extra absorption, enter a lower coverage. At 200 ft² per gallon the default deck needs 160 × 2 ÷ 200 = 1.6 gal, still 2 cans, but the margin for a second visit is smaller.
What this tool does not do
It does not replace a professional quote, check the condition of the deck, or tell you whether the old finish needs stripping. It counts the area you enter once, so add railings, balusters, steps and board edges yourself. A 20 ft by 3 ft rail stained on both sides is 120 ft². Adding it to the 160 ft² deck gives 280 ft², and 280 × 2 ÷ 300 = 1.87 gal, still 2 cans.
On-site considerations for deck stain
Follow the label for the temperature range, the drying time and how long the wood must be dry before you stain. Many stains want mild weather, low humidity and no rain for 24 hours, but the limits differ by product. Clean the wood and let it dry first, and test the stain on a spare board, because the colour depends on the wood.
Older painted surfaces, such as railings or a house wall, may contain lead. In the US, the EPA lead renovation rules apply to work on homes built before 1978. Wear suitable protection when you sand or strip, and ventilate when you use solvent-based products.
Measure the deck surface carefully. A rectangle of 16 ft by 10 ft is 160 ft², but a deck with a bay or a stair is the sum of its parts. Count the top of the boards for the main area, then add the sides of steps, risers and rails if you stain them. Stain soaks into end grain more than the face of the board, so cut ends and board edges can use noticeably more than the label suggests. The Wood Handbook from the USDA Forest Service explains how wood surfaces absorb finishes.
Codes and compliance
Limits on solvents in coatings (volatile organic compounds, or VOCs) are set by region, and some places restrict higher-VOC products. In the UK, employers handling solvent products must assess them under COSHH. Check the safety data sheet for the product you buy. Rules on decks themselves, such as height, guards and permits, are separate and set locally.
Before you order
Buy all the stain you need in one go, from the same batch, because colour can vary slightly between batches. Compare the price per gallon or litre rather than the price per can, since can sizes differ. If you will need two cans, check whether a larger size costs less per unit. Keep any leftover for touch-ups, sealed and out of the cold.
Adjusting the defaults
Every input is editable. The defaults of 160 ft² (about 15 m²), 2 coats, 300 ft² per gallon and a 1 gal can are planning values only. Enter your own area, the coverage and coats from your label, and your can size and price. A blank price hides the cost, and zero or blank dimensions are rejected.
Using this deck stain calculator alongside other BuildMetricLab tools
Use the same deck size with the deck framing and decking board calculators to plan the whole build. All BuildMetricLab tools run in your browser, so nothing you type is sent anywhere, and every formula is shown on the page so you can check the maths.
Sources & methodology
Volume = area × coats ÷ coverage per coat. Coverage is the area one unit of stain covers in a single coat, as printed on the label. The can count is the volume divided by the can size, rounded up to a whole can, and the cost is cans × price per can. With the defaults, 160 ft² × 2 coats ÷ 300 ft² per gallon = 1.07 gal, which needs 2 one-gallon cans, or $76 at $38. In metric, 15 m² × 2 ÷ 8 m² per litre = 3.75 L, which needs 2 cans of 2.5 L. One US gallon is 3.785 L, so 300 ft² per gallon is about 7.4 m² per litre. The tool counts the area you enter once. Railings, balusters, steps and board edges are not included unless you add their area, and no wastage is applied.
Frequently asked questions
Are deck stain calculator results accurate enough to order materials?
The arithmetic is exact, but the result depends on the coverage figure you enter. Rough, weathered or thirsty wood takes more stain than the label suggests, so treat the result as a minimum. For the defaults (160 ft², 2 coats, 300 ft² per gallon) the tool gives 1.07 gal, which rounds up to 2 one-gallon cans.
What wastage percentage should I use?
This calculator adds no wastage. Rough or weathered boards, gaps between boards and railings can raise usage by 10 to 15% or more. You can allow for that by entering a lower coverage per gallon from the low end of the label range, or by buying an extra can. At 200 ft² per gallon the default needs 1.6 gal instead of 1.07.
Does this tool replace professional advice?
No. This is a planning estimator for stain quantities. It does not assess the condition of the deck, its footings or its load capacity. For structural questions or building rules, consult a licensed contractor or engineer.
Can I change the unit prices?
Yes. The price per can and the can size are editable, so enter your supplier's quote. If you leave the price blank, the tool hides the cost line.
Spotted something off?
Calculations or display — let us know.
Related tools
Calculators from other categories that planners often reach for next.













