Conversions & Units
Gallons to Liters Calculator
Converts US or imperial gallons to liters, and liters back to both, with quarts, pints and cubic feet
Updated October 1, 2026 · Live
What this tool does
Converts a volume in US liquid gallons or imperial (UK) gallons to liters, with the other gallon, quarts or pints, cubic feet and cubic meters; the metric side converts liters back to both kinds of gallon. Exact unit definitions throughout.
Gallons to liters in either kind of gallon, or liters to both kinds of gallon on the metric side, with quarts, pints, cubic feet and cubic meters alongside. The conversion factors are exact.
People also use
Formula Used
Formula Used
How the US gallons to liters conversion works
The calculator multiplies the gallon input by an exact factor to produce liters: 3.785411784 for US liquid gallons, 4.54609 for imperial gallons, chosen with the gallon type selector. The US factor comes from the definition: one US liquid gallon equals exactly 231 cubic inches, and one cubic inch equals exactly 16.387064 mL, so 1 US gal = 231 × 16.387064 mL = 3,785.411784 mL = 3.785411784 L. The secondary outputs, the other kind of gallon, quarts or pints, cubic feet and cubic meters, come from the same input using fixed, exact factors. Switch the page to metric units and it runs the other way, taking liters and giving both kinds of gallon.
The exact conversion factors
The US liquid gallon is defined as 231 cubic inches. The inch was fixed at exactly 25.4 mm in 1959, making the cubic inch exactly 16.387064 mL. Multiplying: 231 × 16.387064 = 3,785.411784 mL = 3.785411784 L, the figure NIST Special Publication 811 lists in its conversion tables. The imperial gallon is defined in law rather than from the inch: Schedule 1 of the UK Weights and Measures Act 1985 sets the gallon at 4.54609 cubic decimetres, which is 4.54609 liters exactly. The imperial quart is a quarter of that and the pint an eighth. Both are defined constants, not measurements. The calculator displays liters to two decimal places (3.79 L for 1 US gal), but the arithmetic uses the full factors.
US gallon and imperial gallon: a key distinction
The US gallon and the imperial (UK) gallon are different units. One US gallon is 3.785411784 liters; one imperial gallon is 4.54609 liters, about 20% larger. A product labeled in imperial gallons holds more than the same number of US gallons. The calculator shows the other gallon as a secondary output so the two can be compared directly: 1 US gal = 0.833 UK gal, and 1 UK gal = 1.201 US gal. The distinction matters when reading UK equipment datasheets, older Canadian and Australian specifications, or anything built before those countries went metric; a British 40-gallon hot water cylinder is 181.8 liters, where a US 40-gallon heater is 151.4.
Worked examples
One US gallon equals 3.79 liters, 0.833 imperial gallons, 4.00 US quarts, and 0.1337 cubic feet. Ten US gallons equal 37.85 liters, 8.327 imperial gallons, 40.00 quarts, and 1.3368 cubic feet. Five US gallons equal 18.93 liters, 4.163 imperial gallons, 20.00 quarts, and 0.6684 cubic feet. The other way, on the metric side, 10 liters is 2.642 US gallons or 2.200 imperial gallons, and 1,000 liters, one cubic meter, is 264.172 US gallons or 219.969 imperial gallons.
Where US gallons appear in construction and engineering
Water heaters in the US are rated and sold by storage capacity in gallons; a 40-gallon or 50-gallon tank is the standard residential size. Hot-water demand calculations and energy-efficiency ratings use gallons per hour. Irrigation systems are designed in gallons per minute (GPM) for pump sizing and pipe flow. Concrete mixing water, grout mix ratios, and waterproofing product coverage rates are sometimes stated in gallons per square foot or gallons per bag. When working with metric-spec equipment or international product documentation, those gallon figures convert to liters using this factor.
Tank and container capacity
Rainwater harvesting tanks, cisterns, and retention basins are commonly sized in gallons in the US. A 500-gallon cistern is 1,892.7 liters; a 1,000-gallon tank is 3,785.4 liters. Septic tanks rated in gallons convert to cubic meters for permitting documents that require metric volumes: divide the liter result by 1,000, or divide gallons directly by 264.172.
US quarts and the gallon subdivision
One US liquid gallon equals exactly 4 US quarts, 8 US pints, or 128 US fluid ounces. These are exact subdivisions defined by the same 231-cubic-inch base. When a product data sheet states a coverage rate or mixing ratio in quarts, multiplying by 4 converts to gallons, and then multiplying by 3.785411784 converts to liters.
Cubic feet from gallons
One cubic foot equals exactly 1,728 cubic inches. Since one US gallon is 231 cubic inches, one cubic foot holds 1,728 ÷ 231 = 7.48052 US gallons, and equivalently one gallon is 1 ÷ 7.48052 = 0.133681 cubic feet. This relationship connects the gallon to structural volume calculations: a 4 ft × 4 ft × 1 ft retention basin holds 16 ft³ × 7.48052 = 119.7 gallons = 453 liters.
Precision and rounding
Liters are displayed to two decimal places (resolution of 0.01 L = 10 mL), appropriate for tank sizing and fluid volumes at the scale of residential and commercial construction. Gallons are shown to three decimal places to make the US and UK difference visible even at small volumes. Quarts and pints are shown to two decimal places, cubic feet and cubic meters to four.
Using this alongside other BuildMetricLab tools
The liter result connects directly to metric pump-flow calculations, tank volume calculations, and irrigation system sizing. For larger volumetric conversions the cubic yards to cubic meters calculator handles concrete and aggregate volumes. All BuildMetricLab tools run entirely in the browser, with no sign-up and no data sent anywhere, and the formula is shown on the page so the math can be audited.
Sources & methodology
US gallons to liters: × 3.785411784 (231 in³ × 16.387064 mL). Imperial gallons to liters: × 4.54609 (statutory definition). Liters to gallons: divide by the same factors. The other gallon = liters ÷ its factor; US quarts = US gal × 4; UK pints = UK gal × 8; cubic feet = liters ÷ 28.316846592; cubic meters = liters ÷ 1,000. All factors are exact.
Frequently asked questions
Is the US gallon to liter conversion exact?
Yes. One US liquid gallon is defined as exactly 231 cubic inches, and the cubic inch has been fixed as exactly 16.387064 mL since 1959. Multiplying gives 1 US gal = 3.785411784 L exactly. The conversion factor is a definition, not a measurement.
What is the difference between a US gallon and a UK (imperial) gallon?
A US liquid gallon is 3.785411784 liters; an imperial (UK) gallon is 4.54609 liters, about 20% larger. One US gallon equals 0.832674 imperial gallons and one imperial gallon 1.200950 US gallons. Products and equipment rated in imperial gallons hold more than the same nominal figure in US gallons. Pick the kind of gallon in the selector and the calculator shows the other one alongside.
How many liters are in a 5-gallon bucket?
A standard 5-US-gallon bucket holds 5 × 3.785411784 = 18.93 liters. The nominal 5-gallon label refers to US liquid gallons.
Does this convert in the other direction, liters to gallons?
Yes. Switch the page to metric units and the input becomes liters, with US gallons as the result and imperial gallons, quarts, pints, cubic feet and cubic meters alongside. The arithmetic is the same defined factors divided instead of multiplied, so 10 liters is 2.642 US gallons or 2.200 imperial gallons.
Does this replace professional advice?
The arithmetic is exact for the volume entered. For system design — tank sizing, pump selection, irrigation design, or plumbing capacity — the volume conversion is one step in a broader engineering calculation. A licensed plumber, mechanical engineer, or irrigation designer is the appropriate professional for system-level decisions.
Spotted something off?
Calculations or display — let us know.
Related tools
Calculators from other categories that planners often reach for next.













