BuildMetricLab

Roofing

Gutter Calculator

Gutter length, hangers and cost from the eaves length

Updated May 13, 2026 · Live

What this tool does

Estimates the length of gutter, the number of hangers and the cost from the total eaves length you enter.

Estimates the length of gutter, the hanger count and the cost from the eaves length you enter.

Inputs
ft
$
Result

Guttering Length Required

80.00 ft

Estimated Cost
$360.00
Hangers (every 2 ft)
40
Price it on PlainEstimate

Opens these materials as a new estimate on PlainEstimate, our free estimate and invoice app.

Plain Estimate
From BrightScale Labs
Invoice maker
Quote at the door. Signed on the spot.
Estimates and invoices for trades, built while you are still in the room.
Scan to get
Get it onGoogle Play

People also use

Formula Used
L=E,N=⌈L÷s⌉,C=L⋅pL = E,\quad N = \lceil L \div s \rceil,\quad C = L \cdot p
LL
Gutter length required
EE
Eaves length
ss
Fixing spacing (2 ft per hanger)
NN
Hangers or brackets
pp
Price per ft

How the gutter calculator works

A gutter runs along the eaves, so the length you need is the total eaves length. This calculator takes that length, counts the hangers that hold it up and prices the run. The formulas are L = E for the length, N = ⌈L ÷ s⌉ for the hangers at spacing s, and C = L × p for the cost. The page works in feet and converts internally (1 ft = 0.3048 m), so the metric and US-unit versions of the same roof agree.

Example with the defaults on this page: a house with 80 ft of eaves needs 80 ft of gutter, which is 24.4 m. Hangers every 2 ft come to 80 ÷ 2 = 40. At $4.50 per foot the gutter costs 80 × 4.50 = $360.00. In metric, $4.50 per ft is about $14.76 per m.

Measuring matters more than the arithmetic. A 30 ft × 40 ft house with a gable roof has gutter on the two long sides only, 2 × 40 = 80 ft. The same house with a hip roof has gutter on all four sides, 2 × 40 + 2 × 30 = 140 ft, or 42.7 m, which is 70 hangers and $630. Adding 10% for corners and cut-offs to the 80 ft case gives 88 ft, so enter 88.

Typical US roofing wastage

The tool adds no allowance, because the extra depends on the roof. Corners, joints, end caps and cut-offs all use some length, and gutter comes in set lengths, so you buy more than the eaves length. Installers commonly add 5 to 10%, which is a trade habit and not a published standard. A roof with many corners, such as a hip or an L-shape, needs more fittings and offcuts than a plain rectangle. A run that is not a multiple of the stock length leaves a short offcut, so a joint is better placed where it is least visible than avoided.

What this tool does not do

It does not size the gutter or downspouts to your roof area and rainfall, and it does not count downspouts, corners, end caps, outlets or fascia brackets as separate parts. It does not cost labour, access equipment or the removal of old gutter. It is a length and cost estimate, and it is not a substitute for a quote from a contractor.

On-site considerations for gutter

In the United States 5 in K-style gutter and 2 × 3 in downspouts are the common residential sizes; 6 in gutter suits larger roof areas. Size depends on roof area, pitch and local rainfall, so ask your supplier or installer to check it. Gutter needs a slight fall towards each downspout, so water drains and does not stand, and a long run is usually split with a downspout at one or both ends. US installers commonly space hangers about 24 in (610 mm) apart and no more than about 36 in (915 mm), with closer spacing under heavy snow, so the tool counts one hanger per 2 ft. Follow your product's instructions, which override this convention.

Gutter work is work at height. In the United States, OSHA's construction fall-protection rule applies at a working height of 6 ft (1.8 m) or more. Use a ladder that reaches well above the eave and is footed or tied, keep your weight inside the stiles, and consider a contractor for anything beyond one storey.

Codes and compliance

Hanging a new gutter on an existing house rarely needs a permit. Where the water goes is the part that can be controlled. Many US cities and states encourage or require roof runoff to be kept off sewers and away from foundations, and the EPA's Soak Up the Rain pages cover disconnecting downspouts and using rain barrels. Rules differ by locality, so ask your local building department. Do not send roof water to a neighbour's land or onto a path where it can freeze.

Before you order

Measure each eave along its length and add them. Note every corner, outlet and joint, and count them for the fittings. Check the profile of any existing gutter, because parts from different systems rarely fit. Ask the supplier for the stock length, the colour and the number of hangers or brackets in the pack, then round up the length you buy. Compare the price of a complete system with brackets and fittings, not the price per length of channel alone.

Adjusting the defaults

Every input is editable. The eaves length must be above zero. A blank or zero length is refused instead of quietly using a default, and a blank price hides the cost line. If you only gutter part of the roof, enter just those eaves. The default price is an example, so replace it with a quote.

Using this gutter calculator alongside other BuildMetricLab tools

Pair this estimate with the roof area and roof pitch calculators to understand the roof the gutter drains. All BuildMetricLab tools run in your browser. Nothing you type is sent anywhere, and every formula is shown on the page so you can audit the maths.

Sources & methodology

Gutter length equals the total eaves length you enter, because gutters run along the eaves and not along rakes or ridges. The page takes the length in ft; 1 ft = 0.3048 m. The hanger count is length ÷ 2 ft, rounded up (US hangers are commonly spaced about 24 in apart). Estimated cost is length × price, hidden if no price is entered. The length must be above zero and the price zero or more. The tool adds no allowance for corners, joints or cut-offs, and does not size the gutter or count downspouts or downpipes. Fixing spacing is a trade convention; follow your product's installation instructions.

Frequently asked questions

Are gutter calculator results accurate enough to order materials?

They are a good starting length. The result equals the eaves length you enter, so it is only as accurate as your measurement. Add 5 to 10% for corners, overlaps and cut-offs, then order the downspouts, end caps and corner pieces separately. Gutter is sold in set lengths, commonly 10 ft or 20 ft, so round up.

Does this calculator add extra length for corners or overlaps?

No. The gutter length is exactly the eaves length you enter. The hanger count is one per 2 ft of run, rounded up, and the cost is length × price. Add extra length yourself for corners, end caps and overlaps at joints, or check with your supplier before ordering.

Is this a substitute for a licensed contractor or engineer?

No. It estimates length and cost only. It does not size the gutter or downspouts to your roof area and rainfall, and it does not plan where the water goes. For roof work, and for drainage near a foundation or to a storm sewer, consult a licensed contractor or design professional.

Can I change the unit prices?

Yes. The price per foot is editable, and a blank price hides the cost line so only the length and hanger count show. A price of zero is accepted. The eaves length must be above zero.

Spotted something off?

Calculations or display — let us know.

Calculators from other categories that planners often reach for next.