BuildMetricLab

Project Cost Estimators

HVAC Replacement Cost Calculator

Furnace, vents and thermostat replacement cost, with contingency and tax

Updated May 27, 2026 · Live

What this tool does

Estimates the cost of replacing a furnace, its vents or registers and the thermostat from the furnace rating, the vent count and a specification tier.

Estimates a planning-level furnace replacement cost from the furnace rating, the number of vents or registers, a specification tier, contingency and tax.

Inputs
BTU/h
%
Result

HVAC Replacement (incl. contingency)

$10,356.15

Furnace
$5,554.68 (80,000 BTU/h, 23.4 kW)
Vents/Registers (×8)
$3,360.00
Thermostat / commissioning
$500.00
Contingency 10%
$941.47
License Note
HVAC install must be by a state-licensed contractor; permit + inspection often required
Plain Estimate
From BrightScale Labs
Invoice maker
Quote at the door. Signed on the spot.
Estimates and invoices for trades, built while you are still in the room.
Scan to get
Get it onGoogle Play

People also use

Formula Used
C=(k⋅rk+L+n⋅rn+c0)⋅1.10⋅(1+t)C = (k \cdot r_k + L + n \cdot r_n + c_0) \cdot 1.10 \cdot (1 + t)
CC
Replacement cost
kk
Furnace output (kW, from BTU/h)
rkr_k
Unit rate per kW for the chosen tier
LL
Installation labour charge
nn
Number of vents
rnr_n
Unit rate per vent for the chosen tier
c0c_0
Thermostat and commissioning charge
tt
Tax rate

How the hvac replacement cost calculator works

This calculator prices the heating side of a furnace replacement. It adds up four things: the furnace itself, priced per kW of output; a fixed installation labour charge; the vents or registers, priced per unit; and a fixed charge for the thermostat and commissioning. A 10% contingency goes on top, then tax. The formula is C = (k × r_k + L + n × r_n + c₀) × 1.10 × (1 + t). The rates depend on the specification tier you choose and on the page's currency.

Example with the defaults on this page: an 80,000 BTU/h furnace is 80,000 ÷ 3,412.14 = 23.45 kW. At the mid-range rate of $190 per kW that is $4,454.68, plus $1,100 of installation labour, which is $5,554.68. Eight vents at $420 each add $3,360, and the thermostat and commissioning charge is $500. The subtotal is $9,414.68, the 10% contingency adds $941.47, and the total is $10,356.15 with no sales tax. At a 6% sales tax it is $10,977.52.

The tier changes the answer. The same furnace and eight vents come to $7,834.64 at budget rates (140 per kW, 280 per vent) and $14,437.27 at premium rates (280 per kW, 620 per vent), both with 10% contingency and no tax. The metric equivalent of the default is a 23.45 kW furnace.

Typical US project cost estimators wastage

There is no wastage on a replacement like this, so the question is how close the estimate is. A planning estimate like this one is a rough guide, and costs vary widely between quotes. The fixed 10% contingency is a planning allowance, not a published standard, and an awkward job can exceed it by a wide margin. Treat the result as a range, and collect itemised written quotes before you commit. Where the tier rates and a real quote disagree, the quote wins.

What this tool does not do

It does not size the furnace, and size changes the price more than anything else here. It does not cost ductwork, pipework, flues, gas or electrical upgrades, permits, the removal of the old unit, or air conditioning. It does not model a heat pump, so it is not a heat pump quote. It does not include the cost of any incentives, rebates or grants. It is a budget aid and not a substitute for a quote.

On-site considerations for hvac replacement cost

The biggest price drivers are the size, the type and efficiency of the equipment, and how much of the distribution system needs work. A like-for-like swap in the same place is cheapest. Moving the furnace, changing fuel, replacing ductwork or adding a flue all add cost. ACCA Manual J is the standard US residential load calculation, and ENERGY STAR advises that a contractor uses it to size a system.

ENERGY STAR certified furnaces have higher AFUE ratings, the share of fuel energy that reaches the house as heat. A higher-efficiency unit costs more to buy and less to run, so the premium tier is not automatically a waste. Ask each contractor which model, efficiency rating and warranty the quote includes, and compare the same specification across quotes.

Codes and compliance

In the United States, furnace replacement normally needs a licensed HVAC contractor and a permit, and the rules are set by state and local codes. Sales tax on materials and labour varies by state and locality, so the tax field defaults to 0. Permit, inspection and disposal fees are separate from the equipment and labour in this estimate. Other countries have their own licensing and efficiency rules, so follow the ones where you build.

Before you order

Ask for at least three written quotes that list the model, the size, the efficiency, what is included and what is not, and the warranty. Check the installer is licensed or registered for this work. Confirm whether the quote covers removing and disposing of the old unit, new ducting, a flue, the controls and any making good. Compare quotes on the same basis, and ask for the load or heat-loss calculation that justifies the size, because a quote that skips it may be sized by habit.

Adjusting the defaults

The furnace rating, the number of vents or registers, the tier and the tax rate are editable. The rating must be above zero, the vents or registers count must be a whole number of 1 or more, and the tax rate must be entered, with 0 allowed. A blank or zero field is refused instead of quietly using a default. The per-unit rates and the 10% contingency are built in, so use your quotes to judge the result.

Using this hvac replacement cost calculator alongside other BuildMetricLab tools

Pair this estimate with the insulation cost and new-build cost calculators to see how fabric and heating budgets fit together, and with the heat pump sizing calculator for a load check. All BuildMetricLab tools run in your browser. Nothing you type is sent anywhere, and every formula is shown on the page so you can audit the maths.

Sources & methodology

Total = (output × rate per kW + installation labour + vents × unit rate + thermostat and commissioning) × 1.10 × (1 + tax ÷ 100). The rate per kW, the unit rate and the fixed labour and thermostat charges depend on the specification tier (budget, mid-range or premium) and on the page's currency. The page takes the furnace input rating in BTU/h and converts it to kW (1 kW = 3,412.14 BTU/h) before pricing, so the same furnace prices the same in either unit system. The 10% contingency and all of the rates are planning assumptions, not published statistics. Tax applies to the subtotal plus contingency; a negative rate is treated as zero. Output must be above zero, the vent count must be a whole number of 1 or more, and the tax rate must be entered. The tool does not size equipment, cost ductwork, pipework, flues, permits or air conditioning, and it does not model heat pumps.

Frequently asked questions

Are hvac replacement cost calculator results accurate enough to order materials?

No. The result is a budget, not a quote or a parts list. It applies per-kW and per-vent rates from three planning tiers, so it cannot reflect your ductwork, access, equipment brand or local labour rates. Use it to judge what a furnace replacement might cost, then collect itemised written quotes.

What does the 10% contingency cover?

The tool adds a fixed 10% of the equipment, labour and thermostat subtotal. It is a planning allowance for small extras such as duct modifications, electrical connections, a new flue or removal of the old unit. It is not a published standard, and older or awkward installations can need more. Confirm the scope with your contractor.

Does this replace professional advice?

No. It estimates cost only. It does not size a furnace, design ductwork or check combustion air and venting. Furnace replacement is regulated work that needs a licensed HVAC contractor and often a permit. Ask for a load calculation (ACCA Manual J or equivalent) before choosing the size.

Can I change the unit prices?

Not directly. You can change the furnace rating, the vent count, the spec tier and the tax rate, but the per-kW and per-vent rates are built in and differ by tier. If your quote is far from the result, use the quote. The tax rate can be 0, and a blank tax rate is refused.

Spotted something off?

Calculations or display — let us know.

Calculators from other categories that planners often reach for next.