BuildMetricLab

Flooring

Grout Calculator

Grout by tile size, thickness and joint width, with density, wastage and whole bags, in metric and US units

Updated October 10, 2026 · Live

What this tool does

Works out tile grout from the tiled area, the tile size and thickness and the joint width using the formula on grout makers' data sheets, joint volume per square metre times density, then adds wastage and rounds up to whole bags of the size you buy. Shows the gap per square metre, the mass per square metre, how much one bag covers and the cost at your price per bag, in metric and US units.

Gap volume per square metre times density gives kilograms of grout per square metre; times the area, plus wastage, rounded up to bags.

Inputs
ft²
in
in
in
in
lb/ft³
%
lb
$
Result

10 lb Bags of Grout Required

1

Tiled Area
130.0 ft² (12.1 m²)
Tile and Joint
12 in × 12 in × 3/8 in thick, 1/8 in joints
Joint Volume
1.12 in³ per ft² (0.20 L per m²)
Grout at 1.60 kg/L
8.5 lb (3.8 kg), 6.51 lb per 100 ft²
With 10% Wastage
9.3 lb (4.2 kg)
One Bag Covers
153.6 ft² (14.3 m²)
Estimated Cost
$14.00
Price it on PlainEstimate

Opens these materials as a new estimate on PlainEstimate, our free estimate and invoice app.

Plain Estimate
From BrightScale Labs
Invoice maker
Quote at the door. Signed on the spot.
Estimates and invoices for trades, built while you are still in the room.
Scan to get
Get it onGoogle Play

People also use

Formula Used
m=A⋅(W+L)⋅j⋅tW⋅L⋅ρ⋅(1+w),n=⌈m/b⌉m = A \cdot \frac{(W + L) \cdot j \cdot t}{W \cdot L} \cdot \rho \cdot (1 + w), \quad n = \lceil m / b \rceil
mm
Grout mass
nn
Bags, rounded up
AA
Tiled area (ft²)
WW
Tile width (in)
LL
Tile length (in)
jj
Joint width (in)
tt
Tile thickness, the joint depth (in)
ρ\rho
Grout density (lb/ft³)
ww
Wastage as a decimal (10% = 0.1)
bb
Bag size (lb)

How the grout calculator works

Grout fills the gaps between tiles, so the quantity is the volume of gap per square metre times the density of the grout, times the area. The calculator uses the rule grout makers print on their data sheets. Mapei's Ultracolor Plus data sheet gives it as (A + B) ÷ (A × B) × C × D × 1.6 = kg/m², where A and B are the tile length and width in mm, C the tile thickness, D the joint width, and 1.6 the factor that turns litres of joint into kilograms of grout. The calculator does the same sum with the density as an input, adds the wastage you set and rounds up to whole bags of the size you buy. The 1.6 is a consumption figure rather than a measured density: the same sheet lists the dry powder at 1,400 kg/m³ and the wet mix at 1,980 kg/m³, and the maker has set the factor between them to cover the water, the overfill and the clean-off.

With the metric default, 12 m² of 300 by 300 by 8 mm tile at 3 mm joints, the gap is 0.16 L per m², which is 0.26 kg/m² at 1.6 kg/L. That is 3.1 kg of grout, 3.4 kg with 10% wastage, so one 5 kg bag, and the bag would cover 19.5 m². Mapei's own table for a 300 by 300 by 10 mm tile at a 3 mm joint says 0.3 kg/m²; the formula gives 0.32 kg/m², the difference being the table's rounding to one decimal.

Checking the figure against a coverage table

In the United States grout is sold by the pound and makers publish square feet per bag rather than kg/m². The US default is 130 ft² of 12 by 12 by 3/8 in tile at 1/8 in joints, which comes to 6.51 lb per 100 ft² at 100 lb/ft³ (1.60 kg/L): 8.5 lb of grout, 9.3 lb with 10% wastage, one 10 lb box, and a box covers about 154 ft². The Polyblend Plus data sheet from Custom Building Products gives 146 ft² for a 10 lb box of non-sanded grout on that tile and joint, and 289 ft² for a 25 lb bag of sanded. Those are 6.85 and 8.65 lb per 100 ft², so the maker's non-sanded figure sits about 5% above the formula at 100 lb/ft³ and the sanded figure about a third above it, because sand is heavier than the fine fillers in an unsanded grout. The density input is there to match the product: 105 lb/ft³ reproduces Custom's non-sanded figure and 133 lb/ft³ (2.13 kg/L) the sanded one. Where the maker prints a coverage table, that table is the order and the calculator is the check.

Sanded, unsanded and the joint width

The joint width decides the grout as well as the quantity. Custom's sheet puts its sanded grout at joints of 1/8 to 1/2 in (3.2 to 13 mm) and its non-sanded grout at joints up to 1/8 in (3.2 mm), and both are tested to ANSI A118.6, with the sanded product also to A118.7. The width itself has a floor in the US installation standard: the Ceramic Tile Education Foundation quotes ANSI A108.02 section 4.3.8, which says the joint "shall be at least three times the actual variation of facial dimensions of the tile supplied" and that "in no circumstance shall the grout joint be less than 1/16 in"; for running-bond patterns with any tile side over 15 in, section 4.3.8.1 asks for an average of at least 1/8 in with rectified tile and 3/16 in with calibrated tile. TileLetter covers the same clause and the reasons a 1/16 in floor joint is rarely attainable on a real floor. In the UK and Europe grouts are classed under BS EN 13888: the Tile Association's adhesives and grouts guide describes CG1 as a normal cementitious grout and CG2 as an improved one, typically polymer-modified with reduced water absorption, with W for low water absorption and A for high abrasion resistance; Ultracolor Plus is a CG2WA.

What this tool does not do

It fills rectangular joints of one width to the full depth of the tile. It does not reduce the depth for a bevelled edge or a cushioned tile, does not price adhesive, sealer or spacers, and does not choose a grout for you. Epoxy and ready-mixed grouts are sold by the kilogram or the gallon on their own coverage tables, so those tables take over from the density here. Movement joints are filled with sealant, not grout, and are not in the count.

Adjusting the defaults

Every input is editable. The area is the tiled area, not the room. The tile width, length and thickness come from the box; the joint width is the spacer size. The density is in kg/L (metric) or lb/ft³ (US units) and sets the mass per litre of joint: 1.6 kg/L is Mapei's factor for its cement grouts, and a maker's coverage table gives the figure for a particular product. Wastage covers the grout that is mixed and not used, the overfill and the clean-off; 10% is the usual starting point and 5 to 10% is the overage grout makers suggest. The bag size and the price per bag set the order and the cost; a price of zero shows quantities only.

On-site considerations

Cement grout is mixed in small batches because it has a pot life, 20 to 25 minutes for the Mapei product above, so an open bag goes further than the sum suggests only if the batches are sized to the area that can be grouted and cleaned in that time. Joints are raked clean of adhesive to the full depth before grouting, since any adhesive left in the joint reduces the grout volume and shows as a lighter line later. Colour varies slightly between batches, so one order from one lot covers a room, and a sealed spare of the same lot is worth keeping for repairs.

Using this alongside other BuildMetricLab tools

Count the tiles with the tile calculator, pick and count spacers with the tile spacer calculator, and level the floor first with the self-levelling compound calculator. Wall tile in a bathroom has its own bathroom tile calculator. All BuildMetricLab tools run in your browser with no sign-up, and the formula is on the page so the maths can be checked.

Sources & methodology

Joint volume per m² (litres) = (W + L) ÷ (W × L) × joint width × tile thickness, all in mm; grout mass = area × joint volume × density; wastage % added; bags = mass ÷ bag size, rounded up; coverage per bag = bag size ÷ mass per m². The ratio counts each tile's two shared joints once, so it is 1 to 2% above the exact joint fraction. US inputs in ft², in, lb/ft³ and lb are converted to m², mm, kg/L and kg first. References: Mapei Ultracolor Plus technical data sheet, consumption formula (A + B) ÷ (A × B) × C × D × 1.6 and consumption table; Custom Building Products Polyblend Plus data sheet, coverage per 10 lb box and 25 lb bag; ANSI A108.02 section 4.3.8 joint width as quoted by the Ceramic Tile Education Foundation; Tile Association guide to adhesives and grouts, BS EN 13888 grout classes.

Frequently asked questions

Are grout calculator results accurate enough to order materials?

Yes, as a bag count. The sum is the one on the grout makers' data sheets, gap volume per square metre times density, and it matches Mapei's printed consumption table to the rounding. For a US product with a published square-feet-per-bag table, that table is the order and the calculator is the check; set the density so the One Bag Covers row matches the table for your tile and joint, and the count follows.

What wastage percentage should I use?

10% is the starting point, and grout makers suggest an overage of 5 to 10%. The losses are the mix left in the bucket at the end of each batch, the overfill that is sponged off and the grout that dries in the joint line before it is used. Small tiles with many joints, first-time work and a large floor grouted in many batches lose more; a wall of large-format tile with narrow joints loses less. Wastage is applied to the mass before the bag rounding, so on a small job the rounding to a whole bag is the bigger allowance.

Does this tool replace professional advice?

No. It is a quantity estimate from the dimensions you enter. Which grout suits the tile, the joint width and the exposure is set by the maker's data sheet and the installation standards, ANSI A108.02 and A118 in the United States and BS EN 13888 in the UK and Europe, and a wet area, a pool or a floor over heating has its own requirements. For work that affects structure, gas, electrics, plumbing or drainage to a public sewer, use a suitably qualified professional.

Can I change the unit prices?

Yes. The price is per bag of the size you enter, and the cost row is that price times the number of bags, so it follows the product you intend to buy. Change the bag size to the pack on the shelf, 5 kg, 10 kg or 23 kg in the UK, 10 lb boxes or 25 lb bags in the United States, and the count and the cost both update. Leave the price at zero to see quantities only.

Spotted something off?

Calculations or display — let us know.

Calculators from other categories that planners often reach for next.