Bathroom
Shower Pan Size Calculator
The standard shower pan or tray that best fills an alcove, with the space left over
Updated October 5, 2026 · Live
What this tool does
Finds the widest standard shower pan, tray or base that fits a three-walled alcove, and the deepest at that width, from its width, depth and a fit clearance, and shows the space left over and other sizes that fit. US sizes in inches, metric sizes in millimetres.
Alcove width and depth, less a fit clearance, are compared with a list of standard pan and tray sizes; the widest that fits, and the deepest at that width, is the result.
People also use
Formula Used
Formula Used
How the shower pan size calculator works
A shower pan in the US, a shower tray in the UK, a shower base in Australia: three names for the one-piece floor of a shower, and it has to be chosen before the walls are closed up. They are made in fixed sizes, so the real question is which size the space will take. Enter the width of the alcove between its two side walls and its depth from the back wall to where the front edge can sit. The calculator returns the widest standard size that fits, and the deepest one at that width, with the space left over each way and up to two other sizes that would also go in. Width comes first because a tray in an alcove is sealed to a wall on both sides, so a gap at the side has to be built out, while the open front can simply stop short.
The two unit sides work from different lists because the two markets fit these things differently. On the US side the list is Kohler's alcove shower bases, from 36 × 34 in to 60 × 60 in, each given as width along the threshold by depth. A US alcove base has a threshold moulded into the front edge and a flange on the other three, so it only goes in one way round, and it sits between bare studs. Kohler's installation guide for shower receptors says all dimensions are nominal and gives the stud opening a tolerance of +1/4 in (6 mm) and −0, which means a 60 in base wants an opening of 60 in to 60 1/4 in. On the metric side the list is the Mira Showers tray range sold in the UK, from 760 × 760 mm to 1800 × 800 mm. A plain rectangular tray has no built-in threshold, so the calculator tries it both ways round.
Two examples. An alcove 1,250 mm wide and 850 mm deep, with 5 mm of clearance, has 1,240 × 845 mm of usable space. The widest tray that fits is 1200 × 800 mm, with a floor area of 0.96 m², leaving 50 mm of width and 50 mm of depth; 1200 × 760 mm and 1100 × 800 mm would also fit. On the US side, a stud opening 60 1/4 in wide and 32 1/2 in deep takes a 60 × 32 in base of 13.3 ft², with 1/4 in to spare across the width and 1/2 in front to back.
Typical bathroom wastage
A pan is bought whole, so there is no wastage percentage in this calculator and no input for one. What takes its place is the space left over. Width left between the tray and a side wall has to be closed somehow: by packing the framing out to meet a US base, by building a boxing or stub wall beside a tray, or by picking an enclosure with a fixed panel that covers it. A large gap usually means a different size, or a made-to-measure tray, deserves a look. Depth left over is the easy one. The front of an alcove is open and the tray simply stops short of where it could have reached.
The wastage that does matter in a shower is in the tiles on the walls around it, and the bathroom tile calculator has its own allowance for that.
What this tool does not do
It picks from two manufacturers' lists. Other makers sell sizes in between, and corner shapes such as quadrant and pentagon trays are not covered at all. It does not place the drain: the waste position is different on every model and comes from the product's own drawing. It does not check that the floor will carry the tray, that the waste pipe can be given its fall, or that a door will clear the toilet beside it. And the sizes are nominal. Kohler's specification sheets carry the line "Measure your actual product for rough-in details", which is the right order to do things in: buy or at least measure the base, then finish the framing around it.
On-site considerations for shower pan size
Measure the alcove in more than one place. Walls lean and corners are rarely square, so take the width at the back and at the front, low down where the tray will sit, and enter the smallest figure. Fit clearance is there for what the tape cannot tell you. It is 0 by default, because a nominal size is made to go into its nominal opening, and you raise it by however much you think the walls wander. The calculator takes it off the width twice, once for each side wall, and off the depth once, since only the back is a wall.
Where you measure from depends on the product. A US base is measured stud face to stud face, before any wallboard, and the board and tile later come down over the flange. Sterling's installation guide notes that a receptor can also go over wallboard, and that the framing then has to be made bigger by the thickness of that material. A UK tray is measured between the wall surfaces it will sit against, before tiling. Mira's fitting guide seals the tray to the wall first and then has the tiles fitted down to it with a gap of about 3 mm, which is filled with sealant. The same guide says the floor under a low-profile tray must be completely secure, beds the tray on a thin layer of sand and cement mortar, and leaves it for around 24 hours.
Codes and compliance
Minimum shower sizes are set country by country, and some set none. In the United States the International Residential Code (linked as adopted in Virginia; states make their own amendments) says in section P2708.1 that a shower compartment must have at least 900 in² (0.6 m²) of floor and be at least 30 in (762 mm) in its smallest dimension, measured on the finished interior. An exception allows 25 in (635 mm) where the area is at least 1,300 in² (0.838 m²). The finished interior is smaller than the pan, because wallboard and tile come off each wall. That is why a 60 × 30 in pan depends on the exception: its finished depth ends up under 30 in, while its area stays well above 1,300 in². Section P2708.1.1 asks for a clear opening of at least 22 in (559 mm) to get in and out.
For accessible showers in US public and commercial buildings, the ADA Standards give two sizes in section 608.2: a transfer shower of 36 × 36 in (915 × 915 mm) clear inside, and a standard roll-in shower at least 30 in wide and 60 in deep (760 × 1,525 mm). They do not bind a private house, but they are a useful guide if the shower has to work for someone with limited mobility. In England, Approved Document M Volume 1 draws a level access shower of 1200 × 1200 mm in its bathroom layouts for wheelchair user dwellings. Elsewhere, ask your building authority, and have the waste connected by a licensed plumber where local rules require one.
Before you order
Get the drawing for the exact model, not just its size. It shows the true dimensions behind the nominal ones, where the drain sits, and whether the base is handed. Kohler lists its 60 × 32 in base separately with a left drain and a right drain, and the wrong one puts the waste on the far side of the alcove from your pipework. Check the drain position against the joists or the slab before you commit.
Choose the tray and the door or enclosure together. Mira's guide makes the point that the two must match exactly in shape and size, so that there is no gap for water to get through. If the shower is replacing a bath, measure the space once the bath is out. The opening behind it may not be the size the bath was sold as.
Adjusting the defaults
The defaults are a 36 × 36 in alcove on the US side and 900 × 900 mm on the metric side, both with no clearance, and both return a pan of exactly that size. Change the width and depth to your own measurements and add clearance if the walls call for it, up to 1 in or 25 mm. Dropping the depth a little is a quick way to see what the next size down would be. If nothing fits, the calculator says so and shows the smallest size on its list (36 × 34 in or 760 × 760 mm) so that you can see how far off you are. A made-to-measure tray or a tiled floor built on site is the usual answer for a space that small or that odd.
Using this shower pan size calculator alongside other BuildMetricLab tools
If the answer turns out to be a tiled floor, the shower slope calculator works out the fall to the drain and the waterproof membrane calculator sizes the tanking under it. The bathroom tile calculator covers the walls. All BuildMetricLab tools run in your browser with no sign-up, and the formula is on the page so the maths can be checked.
Sources & methodology
Usable width = alcove width − 2 × fit clearance (a wall each side); usable depth = alcove depth − fit clearance (the back wall only). The result is the widest standard size whose width and depth are both no greater than the usable space, and the deepest at that width; the other sizes shown are the next largest by floor area; the space left over is the alcove dimension minus the tray dimension. US-units pages use Kohler's nominal alcove base sizes in inches (36 × 34, 36 × 36, 36 × 42, 42 × 42, 48 × 32, 48 × 36, 48 × 42, 48 × 48, 60 × 30, 60 × 32, 60 × 34, 60 × 36, 60 × 42, 60 × 60), width along the threshold by depth, and do not rotate them. Metric pages use the Mira Showers square and rectangular tray sizes from 760 × 760 mm to 1800 × 800 mm and try each rectangle both ways round. Both lists were checked against the manufacturers' published ranges in October 2026; other makers offer other sizes, and no drain position, structure or code check is made.
- Kohler: Installation Guide, Shower Receptors (1065122-2): all dimensions nominal, stud opening tolerance +1/4 in (6 mm), −0
- Kohler: specification sheets for alcove shower bases, 36 × 34 in to 60 × 60 in (example: Tresham 60 × 32 in, K-1977)
- Sterling (Kohler): Installation Guide, Shower Receptors and Wall Surrounds (1020188-2): stud opening +1/8 in, installation over wallboard
- Mira Showers (UK): shower tray range, 760 × 760 mm to 1800 × 800 mm
- Mira Showers (UK): Shower tray buying and fitting guide (tiling to the tray, mortar bed for low-profile trays)
- UpCodes: International Residential Code 2021 (Virginia adoption), P2708.1 shower compartment size and P2708.1.1 access
- US Access Board: ADA Accessibility Standards, Chapter 6, section 608.2 shower compartment sizes
- GOV.UK: Approved Document M, Volume 1 Dwellings (England), level access shower layouts
Frequently asked questions
Are shower pan size calculator results accurate enough to order materials?
For choosing a size to price up, yes. For ordering, check the result against the drawing for the exact model first. Sizes are nominal, the list here covers two manufacturers' ranges (Kohler bases on the US side, Mira trays on the metric side), and the drain position and handing are not part of the calculation. Measure the alcove in several places and use the smallest figure.
How much fit clearance should I allow?
None by default. A nominal size is made to fit its nominal opening: Kohler's guide gives the stud opening for its bases a tolerance of +1/4 in (6 mm) and −0, so a 36 in base goes into a 36 in opening. Add clearance only for what you cannot measure out, such as walls that lean or a corner that is out of square, and remember it comes off the width twice and the depth once.
Does this replace professional advice?
No. It compares your measurements with a list of standard sizes. It does not check the floor structure, the drain position, the fall on the waste pipe or your local plumbing code. Have a plumber or installer confirm the model and the rough-in before the framing or the floor is finished.
Can I use this for corner or neo-angle shower pans?
Not for those shapes. The calculator covers square and rectangular pans in a three-walled alcove, measured by width and depth. A rectangular tray in a corner with two walls can be checked by entering the space you are willing to give it, but neo-angle, quadrant and pentagon pans are sized by their own rules and are not in the list.
Spotted something off?
Calculations or display — let us know.
Related tools
Calculators from other categories that planners often reach for next.













