BuildMetricLab

Solar Cost

Battery Cost per Usable kWh Calculator

Compare batteries on cost per usable kWh and per cycle

Updated July 12, 2026 · Live

What this tool does

Compares batteries fairly on cost per usable kWh, cost per cycle and cost per kWh over their rated life.

Enter the battery price, nominal capacity, depth of discharge and cycle life; the calculator returns cost per usable kWh, per cycle and over the whole life.

Inputs
$
kWh
%
cycles
Result

Cost per Usable kWh

$266.67 /kWh

Usable Capacity
4.50 kWh (90% DoD)
Cost per Cycle
$0.200
Energy Delivered Over Life
27,000 kWh (6,000 cycles)
Cost per kWh Over Life
$0.044 /kWh
Note
Lithium (LFP) cycles far more than lead-acid — compare cost-per-kWh-over-life, not sticker price

Diagram

Usable capacity4.5 kWhCost per usable kWh$267Cost per cycle$0.200Cost per kWh over life$0.044$267 per usable kWh
Plain Estimate
From BrightScale Labs
Invoice maker
Quote at the door. Signed on the spot.
Estimates and invoices for trades, built while you are still in the room.
Scan to get
Get it onGoogle Play

People also use

Formula Used
cuse=PricekWhnom⋅DoD,clife=PricekWhnom⋅DoD⋅cyclesc_{use} = \dfrac{Price}{kWh_{nom}\cdot DoD}, \quad c_{life} = \dfrac{Price}{kWh_{nom}\cdot DoD\cdot cycles}
PricePrice
Battery price
kWhnomkWh_{nom}
Nominal capacity
DoDDoD
Depth of discharge fraction
cyclescycles
Rated cycle life

How the battery cost per usable kwh works

A battery's sticker price tells you little until you divide it by what the battery will actually deliver. The calculator does three divisions. Usable capacity is the nominal rating times the depth of discharge. The cost per usable kWh is the price divided by that usable figure. The cost per kWh over life divides the price by the usable capacity times the rated number of cycles, which is the total energy the battery should deliver before it wears out: c = Price ÷ (kWhnom × DoD × cycles). It runs in your browser and shows its formula.

The default is a 5 kWh battery at 90% depth of discharge with a rated life of 6,000 cycles, priced at 1,200 (in any currency). Usable capacity is 5 × 0.9 = 4.5 kWh, so the cost per usable kWh is 1,200 ÷ 4.5 = 266.67. The cost per cycle is 1,200 ÷ 6,000 = 0.20. Over 6,000 cycles the battery delivers 4.5 × 6,000 = 27,000 kWh, so the cost per kWh over life is 1,200 ÷ 27,000 = 0.044, about four and a half cents per kWh stored and returned.

What you enter

All four numbers come from the quote and the manufacturer's data sheet. Battery price is for one battery, in your own currency, and you should say whether it includes installation, the inverter and sales tax or VAT, because the calculator uses whatever you type. Nominal capacity is the rated energy in kWh. Depth of discharge is the share you are allowed to use, commonly 80 to 90% for lithium iron phosphate (LFP) and about 50% for lead-acid. Cycle life is the rated number of full charge and discharge cycles, and the data sheet will say what depth of discharge, temperature and end-of-life capacity that figure assumes.

Reading the result

The cost per kWh over life is the figure for comparing batteries. The cost per usable kWh looks only at the purchase price, and it can mislead. As an illustration, take a lead-acid battery at 300 with 2.4 kWh nominal, 50% depth of discharge and 800 cycles. Its cost per usable kWh is 300 ÷ 1.2 = 250, a little less than the lithium unit above. Over its life it delivers 1.2 × 800 = 960 kWh at 0.313 per kWh, which is about seven times the lithium figure. These are made-up numbers, not market prices, so use quotes for your own comparison.

Cost per cycle is the price divided by the rated cycles, and it is only a rough guide. It does not account for how much energy a cycle moves, so a cycle of a bigger or deeper battery delivers more. Use the cost per kWh over life instead when you compare batteries of different sizes.

Safe by design

This calculator does the arithmetic of cost and nothing that needs a certified person's sign-off. It never gives a cable or fuse size, an earthing arrangement, a charge voltage, or any other protection setting, because a wrong number in those can cause fire or electric shock. Battery installations are regulated, and the rules vary by region. In the US, NFPA 855 covers stationary energy storage, and cell and pack safety tests are covered by UL 1973. Other regions have their own installation rules. All electrical work must be carried out by a qualified, certified installer, and this page is not an installation guide.

Assumptions and limits

The calculator assumes the battery delivers its full usable capacity on every one of its rated cycles. Real batteries fade with age, and a cycle-life rating normally ends when capacity has fallen to a stated fraction of the original, often 70 to 80%. So the average capacity over the battery's life is lower than the figure used here, and the true cost per kWh is higher. Round-trip efficiency also costs something: if only 90% of the energy put in comes back, the delivered cost is 0.044 ÷ 0.9 = 0.049 per kWh. Calendar life can end a battery before its cycle life does. Using the full 6,000 cycles at one a day takes 16.4 years, which is longer than most warranties. The US Department of Energy's overview of solar and storage notes that storage is never 100% efficient. The calculator also leaves out installation, the inverter, taxes, incentives and the value of the energy you store.

Using it with the rest of BuildMetricLab

Battery cost is one part of a solar system's budget. The battery bank capacity calculator works out how big the bank needs to be, the system cost estimator adds the rest of the equipment, and the off-grid against grid-tie comparison helps decide whether you need a battery at all. Every BuildMetricLab tool runs in your browser with no sign-up and nothing sent to a server, and each one shows its formula so you can check the maths.

Sources & methodology

Usable capacity = nominal kWh × depth of discharge. Cost per usable kWh = price ÷ usable capacity. Cost per cycle = price ÷ rated cycles. Energy delivered over life = usable capacity × rated cycles. Cost per kWh over life = price ÷ (usable capacity × cycles). The model assumes full usable capacity on every rated cycle, so capacity fade, round-trip losses, calendar life, installation, taxes and incentives are not modelled. A blank field is refused, and a depth of discharge above 100% is refused. Every result is calculated from the values you enter, all inputs are editable, and no time-sensitive prices or tariffs are embedded.

Frequently asked questions

Why compare on usable kWh, not sticker price?

Only part of a battery's nameplate capacity is usable, and that fraction differs by chemistry. Cost per usable kWh puts lithium and lead-acid on the same footing for the purchase price. For the full comparison, use the cost per kWh over life, which also counts how many cycles each one lasts.

What is cost per cycle?

It is the price divided by the rated number of charge and discharge cycles, a rough measure of what one cycle costs. For the default 1,200 battery with 6,000 cycles that is 0.20 per cycle. It does not consider how much energy a cycle moves, so compare batteries of different sizes on the cost per kWh over life instead.

Why does lithium often win over life?

Lithium (LFP) tolerates deep discharge and thousands more cycles than lead-acid, so despite a higher sticker price its cost per kWh over life is usually lower. As an illustration, a 1,200 LFP battery works out at 0.044 per kWh over life, against 0.313 for a 300 lead-acid battery rated at 50% depth and 800 cycles.

Are efficiency losses included?

No. Round-trip losses and the fade of capacity with age both raise the real cost above the figures shown. With 90% round-trip efficiency, 0.044 per kWh becomes about 0.049. Calendar life can also end a battery before its rated cycles are used.

Spotted something off?

Calculations or display — let us know.