Project Cost Estimators
Attic Conversion Cost Calculator
Estimates cost to convert attic to living space
Updated May 13, 2026 · Live
What this tool does
Estimates cost to convert attic to living space. Insulation, flooring, HVAC, egress.
Estimates total attic conversion cost from the area, build rate, and contingency you enter.
People also use
Formula Used
Formula Used
How the attic conversion cost calculator works
This calculator gives a planning-level budget for turning an attic or loft into living space. You enter the floor area you will gain, an all-in build rate per unit of area, a contingency percentage and, if it applies, a tax rate. It multiplies them together and shows each stage. It runs in your browser and shows its formula.
The total is C = A × r × (1 + g ÷ 100) × (1 + t ÷ 100), where A is floor area, r the build rate, g contingency and t tax. The default is 270 ft² (25 m²) at a placeholder $205 per ft² ($2,207 per m²). The base cost is 270 × 205 = $55,350. Ten per cent contingency adds $5,535 for $60,885, and at 7% sales tax the total is $65,146.95. In metric, 25 m² at 2,000 per m² is 50,000, or 55,000 with 10% contingency, and 66,000 with 20% VAT. Raise the contingency to 15% on the US example and the total becomes $63,652.50, which is $2,767.50 more.
What the build rate covers
The build rate is one all-in figure per square foot or metre that stands in for everything the builder charges: labour, materials, equipment, overheads and profit. Attic conversions cost more per unit of area than most extensions, because the work is in a confined space under an existing roof. The usual items are strengthening the floor so it can carry people and furniture, new insulation, windows or dormers, a staircase, fire safety measures, heating, electrics, plumbing for any bathroom, and finishes. How much each costs depends on the roof shape and the access, so rates vary widely between houses.
The default rate is a placeholder to show the arithmetic, not a market price. Ask two or three builders for a written quote, divide the total by the floor area, and enter that. The area to enter is the floor space you will actually use, not the footprint of the house. Many building codes only count floor with enough headroom, so measure where the ceiling is high enough. For example, the US International Residential Code (IRC) sets 7 ft (2.13 m) for habitable rooms, with allowances for sloped ceilings.
What this tool does not do
It does not break the cost into trades, price the structural work, or tell you whether your roof can be converted at all. It does not include professional fees, permit or planning fees, or the cost of moving out. The sales tax or VAT field applies one rate to everything, and the correct treatment depends on your country and on how the work is invoiced, so check it with the builder. It is not a quote.
On-site considerations for attic conversion cost
Access and structure move the price more than finishes do. Check the height under the ridge, the size and spacing of the existing roof timbers and floor joists, where a new staircase can land without cutting through a room below, and whether the roof needs a dormer or roof windows to give usable headroom. Old roofs can hide damp, wiring and asbestos, and each can add work once the space is opened up. A survey by a structural engineer before you commit is usually money well spent, and the contingency is there for what the survey cannot see. Costs also vary by region and between years, so a rate from a previous quote may be out of date.
Codes and compliance
Adding a habitable floor is regulated almost everywhere. Typical requirements cover the strength of the new floor, safe stairs, a safe escape route and escape window in case of fire, smoke alarms, insulation, and ventilation. The rules differ by country, so follow the local ones. In England, loft conversions are covered by the Building Regulations, including the fire-safety rules in Approved Document B, and the Planning Portal explains when planning permission is also needed. In the US, the IRC (published by the International Code Council) is adopted and amended by each state and city, so ask your local building department which edition applies and which permits you need. Permit and impact fees are separate from construction cost, so ask for the fee schedule before you budget. The structure, electrics, gas and fire safety are work for a chartered or licensed structural engineer, electrician and, where there is gas, a registered gas engineer.
Before you order
Split your budget into hard costs (the build), soft costs (design, surveys, permits, financing) and contingency, and keep them separate so overruns stay visible. A contingency of 10 to 15% is common on renovation work, and a higher figure is sensible for an older house where the roof structure is unknown. Get at least three written quotes on the same specification, and check that each states what is included: the staircase, the fire measures, the heating, decorating, and clearing away. Compare quotes on a cost-per-area basis against the figure you used here. The RSMeans and NAHB sites publish US construction cost data and housing-industry resources for further cross-checking.
Adjusting the defaults
Every input is editable. Enter your own area, build rate, contingency and tax rate, and the result recalculates as you type. The defaults are placeholders, so replace the build rate with a quote. Set the tax rate to zero if your quote already includes it, to avoid counting it twice.
Using this attic conversion cost calculator alongside other BuildMetricLab tools
The home addition, roof replacement and kitchen remodel cost calculators in the same category let you compare this budget with other projects on the same house, and a roof replacement may be worth doing at the same time if the roof is old. Every BuildMetricLab tool runs in your browser with no sign-up and nothing sent to a server, and each one shows its formula so you can check the maths.
Sources & methodology
Total = floor area × build rate × (1 + contingency %) × (1 + tax %). The build rate is an all-in figure (labour, materials, equipment, overheads, profit) that you supply from a quote; the default is only a placeholder. Contingency and tax are applied in turn: contingency to the base cost, then tax to base plus contingency. A blank contingency or tax field is refused, and a negative tax rate counts as none. Professional fees, permit and planning fees, and structural, electrical and fire-safety design are not included. Every result is calculated from the values you enter, all inputs are editable, and no time-sensitive prices or rates are embedded.
Frequently asked questions
Are attic conversion cost calculator results accurate enough to order materials?
Use them as a planning budget, not an order quantity. The arithmetic is exact for the area, rate, contingency and tax you enter, but the build rate is your own input and the real cost depends on the roof structure, access and specification. Get written quotes before committing.
What build rate should I enter?
The default is a placeholder, not a market price. Get two or three written quotes, divide each total by the floor area, and enter that figure. Contingency is a separate input that covers unforeseen costs on top of the base rate, and 10-15% is common on renovation work.
Does this replace professional advice?
No. This tool is a planning estimator. An attic conversion affects the structure, fire safety, electrics and often gas and drainage, so use a qualified structural engineer, a licensed electrician and a registered gas engineer where relevant, and check the local building rules.
Can I change the unit prices?
Yes. Every field is editable. Enter your builder's quote per unit of area, and set the tax rate to match your invoice, or to zero if the rate already includes it.
Spotted something off?
Calculations or display — let us know.
Related tools
Calculators from other categories that planners often reach for next.













